Spa Protect Stain Protect 900ML

Spa Protect Stain Protect (Stain & Metal Control)

Spa Protect Stain Protect (Stain & Metal Control) is a biodegradable water treatment designed to eliminate and prevent metal buildup in spa and pool water, helping protect surfaces and equipment from staining and scaling caused by dissolved metals. This advanced formula targets iron, copper, and manganese, binding and neutralizing metals in the water to prevent discoloration and surface staining. It is phosphate-free and environmentally friendly, making it a safe and effective solution for maintaining clean, clear, and balanced water conditions while protecting spa surfaces and internal components.

Benefits
• Eliminates and controls iron, copper, and manganese in water
• Helps prevent staining on spa and pool surfaces
• Reduces metal-related water discoloration
• Biodegradable and environmentally friendly formula
• Phosphate-free water treatment solution
• Helps protect equipment and extend system lifespan
• Supports clearer and more stable water conditions

Application Method

Pour Spa Protect Stain Protect directly into spa water in front of the return outlet with the circulation system set to recirculate or whirlpool mode.

Instructions

Turn off filtration system and set to Recirculate (Whirlpool) mode, then restart system.
Add product according to dosage guidelines with circulation running.
Run system in recirculate mode for 6 hours to ensure full dispersion.
Switch filtration back to normal Filter mode after treatment cycle.
Wait 60 minutes before bathing.
If high metal levels are present, vacuum debris to waste if needed.
Backwash or rinse filter after treatment cycle is complete.
Shock treat water as per your sanitizer program after application if required.

Recommended Levels

Maintain balanced spa water conditions using regular testing:

→ pH: 7.2 – 7.8
→ Total Alkalinity: 80 – 120 ppm
→ Proper sanitizer residual based on system type

Dosage Guide